| |
Sell
|
Name Thomas high temperature resistant sensors adhesive(THO4064)
Outline This one-component strain modified epoxy adhesive cures fast when heated, it is temperature resistant and easy to operate.
Applications It is applicable to the bonding of such materials as metal, ceramics and composite materials used in sensors. In addition, it applies to the bonding, filling, sealing and casting of heated parts in appliances and instruments.
Features it is white or transparent thick liquid, having no solid particles.
Fast curing speed. And the following chart tells the time needed to solidify after the application of the adhesives at different temperature.
Temperature Time
212 °F 60M
248 °F 30M
266 °F 20M
284 °F 10M
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
No strict treatment of the surface of the substrates needed, which makes it easy to use.
You'll see long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after solidification, though it is a little smelly.
Its storage time is half a year at the temperature of 77 °F and its viscosity value is 7000-20000mpa.s.
The main technical parameters are as follows:
Heat resistance scope:-113 °F-+752 °F
materials Items tested features Tensile strength (MPa) Shearing strength (MPa)
Steel and steel hardness =90 25? 35 25
200? 5 3.5
Nickel and steel volume resistivity 4.0×1014 25? 36.5 26.5
200? 3 3
Ceramics and steel Surface resistivity 2.5×1014 25? 42 32
200? 5.5 5.5
Ceramics and ceramics hydroscopicity <4 25? 42 32
200? 5.5 5.5
Al and Al Tg value =420 25? 45 35
200? 5 4.5
Instruction 1. Clean the surface of the material, make sure they have no dust or oil on them, wait until they are dry.
2. Spread the mixture on the substrates, put them together and apply some strength on them, heated it and let it dry
Notes 1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.
Copyright © 2005-2009 Thomas Technology, Inc. All Rights
From: Thomas Sci Co.,Ltd
Posted on: 2/2/2010 9:27:17 PM
Expiring On: 8/1/2010 9:27:17 PM
Days Left: (-564 days to go!)
 |
| Description |
Name Thomas high temperature resistant sensors adhesive(THO4064)
Outline This one-component strain modified epoxy adhesive cures fast when heated, it is temperature resistant and easy to operate.
Applications It is applicable to the bonding of such materials as metal, ceramics and composite materials used in sensors. In addition, it applies to the bonding, filling, sealing and casting of heated parts in appliances and instruments.
Features it is white or transparent thick liquid, having no solid particles.
Fast curing speed. And the following chart tells the time needed to solidify after the application of the adhesives at different temperature.
Temperature Time
212 °F 60M
248 °F 30M
266 °F 20M
284 °F 10M
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
No strict treatment of the surface of the substrates needed, which makes it easy to use.
You'll see long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after solidification, though it is a little smelly.
Its storage time is half a year at the temperature of 77 °F and its viscosity value is 7000-20000mpa.s.
The main technical parameters are as follows:
Heat resistance scope:-113 °F-+752 °F
materials Items tested features Tensile strength (MPa) Shearing strength (MPa)
Steel and steel hardness =90 25? 35 25
200? 5 3.5
Nickel and steel volume resistivity 4.0×1014 25? 36.5 26.5
200? 3 3
Ceramics and steel Surface resistivity 2.5×1014 25? 42 32
200? 5.5 5.5
Ceramics and ceramics hydroscopicity <4 25? 42 32
200? 5.5 5.5
Al and Al Tg value =420 25? 45 35
200? 5 4.5
Instruction 1. Clean the surface of the material, make sure they have no dust or oil on them, wait until they are dry.
2. Spread the mixture on the substrates, put them together and apply some strength on them, heated it and let it dry
Notes 1. Better to keep the working place well ventilated.
2 .If it has contact with skin, you should wash with soap.
3. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it.
Copyright © 2005-2009 Thomas Technology, Inc. All Rights |
|
|
 |
|
|