| |
Shanghai W&T Detection Technology Co., Ltd.
|
| Description: |
Introduction
The HL-11 Hardness Tester is designed according to the Leeb Hardness principle. It is the result of our many years of accumulated knowledge and experience designing hardness tester
Features
1) net imports of goods impact components - accurate detection of various metal hardness
(2) U.S. intel built-in computer chip - intuitive figures show that full range of hardness and print formats
(3) optimize the design process - 250 x9 storage of test results
( 4) seven series models suitable for all kinds of testing required
(5) meet the test of the modeling scene - any place convenient operations
(6) 18 months of warranty commitment to permanent and after-sales service.
Basic functions and technical indicators
Accuracy: 0.8% (hl = 900)
tests: hl300-900, hb80-650, hrb17.5-101, hrc20-68, hv-1200, hsd31.9-99.6, sb363-1958n/mm2
Test material: carbon steel and cast steel, alloy tool steel, stainless steel and wear-resistant steel, gray iron and ductile iron, copper, cast aluminum, chrome roll, special materials (to be special materials conversion tables, please contact me).
Test direction: the direction of all arbitrary.
Data processing: results of one or more print and storage.
Hardness of separation: the importation of equipment operation key requirements of the hardness of the test results are qualified or not display and print and in line with sound and light tips.
A variety of models
(1) hl-11-type (standard): sensor for the d-, suitable for most occasions.
(2) hl-11dc type: dc sensors for the type of space suitable for small occasions, such as barrel-wall or in the machinery has been assembled within, and so on.
(3) hl-11d +15 type: d +15 sensor for the type suitable for trench or concave.
(4) hl-c-type: c-type sensors to, the impact of small, high quality surface suitable for measuring sclerosis, or hardening of the workpiece, and so thin.
(5) hl-e-: for e-sensor, the impact of a diamond components, suitable for high hardness of the workpiece.
(6) hl-11g for the g-sensor, suitable for Zhu Duanjian and surface roughness of the workpiece.
(7) hl-11dl type: dl for the sensor type, suitable for measuring the workpiece deep groove at the bottom of the narrow hole or tooth surface, and so on
Similar products: HLJ-2100
|
|
 |
|
|