An International Marketplace with the Largest Online Business
Directory of Buyers & Sellers.
|
| |
Chilong Electronic Co., Ltd.
|
| Description: |
Specification :
Coin diameter : 20mmï½?28mm
Coin thickness : 1.2mmï½?2.5mm
Voltage : DC12V+20%
Temperature : -15â, ï½+75â
Installation :
1) The factory plastic token from the coin sampling clamp and install the right coin used.
2.) Slide the coin clamp backward & insert a right coin into the clamp slot then pinch the
coin.
3.) Adjust the insert slot opening size by loosening the screw in the back side of front panel to fit your coins diameter if necessary that can prevent the bigger invalid coins from inserting.
4.) Select the right mode between Normal Open & Normal Close.
Choose the right speed of coin acceptance among 100ms (Slow speed/Long pulse) & 50ms (Medium speed/Medium pulse) & 30ms (Fast speed/Short pulse) by TIMER SWITCH for synchronizing with your software.
5.) VR turning for sensitivity of coin acceptance turn clock wise(-) for slack coin selection &anti-clock-wise(+) for strict coin selection against slugs.
6.) lines guide of 5 lines with 4 pins connector:
Gray line ---- -- Counter(+/-)-----------------
Red line -- ---- DC+12V â
White line ------ Coin signal 8|8|8|8|8|8
Black line ------ GND (Ground) âCounter
Gray line --- -- Counter (-/+) --------- - -----
|
|
 |
|
|
 |